$4,710.00
8002 electromechanical door operator

General Information

The 8002 Swing Door Operator is an electro-hydraulic operator designed for a wide variety of applications. It is suitable for almost all types of external and internal swing doors and has been developed to cope with tough conditions. The operator can be mounted on either side of the door for pull or push action and is suitable for single or double doors fitted with butt hinges or pivots. Suitable for disabled access, nursing homes and hospital corridors - where the requirements are for silence, flexible operation and reliability - as it is for department stores, banks, hotels, etc.

Opening

When an opening impulse is received by the control unit, the motor starts and the hydraulic unit rotates the drive shaft and arm system (door) with high speed towards the open position. Before reaching the fully open position, the speed is reduced to low speed. The door stops, and the motor rotation ceases when the selected door opening angle is reached. This open position is held by the hydraulic valve.

Closing

The spring closing starts when the hold-open time has run out. Before reaching the fully closed position, the speed is reduced to low speed, which will be kept until the door is completely closed. The door is held closed by spring power. to overcome the resistance of a striking plate, the ‘lock kick’ can be adjusted to required level.

Lock Kick

To overcome the resistance of a striker plate, door seals the ‘lock kick’ can be adjusted to the required level of resistance. This will ensure that the lock bolt will securely engage into the striker plate.

Door Specification

  • Electrical 230V AC Mains power, 50Hz fuse 10A
  • Max door weight 250kgs
  • Max door width 1600mm
  • Access controlled locking (Pull side reduces power by 30%)
  • Maximum opening angle 120°
  • Dimensions 110mmH x 110mmD x 716mmL
  • Operating temperature range -15°c to + 50°c

Ordering Information

  • Swing Door Operator (PUSH SIDE) 8002SSIL
  • Swing Door Operator (PUSH SIDE) 8002SSIL

Accessories

  • Telescopic Arm 110 – 235mm Reveal (PUSH SIDE) 8002-173005
  • Telescopic Arm 235 – 360mm Reveal (PUSH SIDE) 8002-173004
  • Joint for Telescopic Arm 235 – 485mm Reveal (PUSH SIDE) 8002-173191
  • Doorstop – Push Arm System 8002-100147
  • Spacer for Door Fitting 8002-173804BK
  • Shaft Extension 20mm 8002-173107
  • Shaft Extension 50mm 8002-173108
  • Shaft Extension 70mm 8002-173109
  • Coordination Unit 8002-100091
  • Radar Activation Unit 8002-1700007
  • Elbow Switch (incl stickers) 8002-1700008
  • Eye-Tech K4 Infra Red Presence Sensor 8002-738765
  • Limit Switch for Sensor or Indication 8002-655614
  • Prescence Detection Board 8002EXB
  • Supervisor Zone Detector 8002ACCE152

Push side mount: Pushing arm system, where the operator is installed on the wall on the opposite side of the door swing. Door opening angle adjustable up to 120°. Swing arm operator package comes with silver cover and black push arm. Part Number 8002PSIL 

Pull side mount: Pulling arm system, where the operator is installed on the wall on the same side as the door swing. Door opening angle adjustable up to 120°. Swing arm operator package comes with silver cover & black pull arm. 40% power loss. Part 8002SSIL

Speed and Force Adjustments:The opening and closing speeds can be varied individually.

 

Lock Kick:To overcome the resistance of a striker plate, the ‘lock kick’ can be adjusted to the required level of resistance. This will ensure that the lock bolt will securely engage into the striker plate.

Controls: Separate valves control door opening, closing and latching speeds.