Securing double timber doors, like external French doors, comes with a unique hardware challenge: managing the meeting edge. Because standard locks aren't designed to handle overlapping door leaves, choosing the right rebated mortice lock is critical not just for smooth operation, but for satisfying home insurance requirements. Here is everything you need to know about choosing the right lock, measuring rebate depths, and avoiding compliance surprises.

What is a Rebated Door Edge?
Double timber doors, including most French doors, have a feature that single doors do not: a rebate. When the two leaves close, one overlaps the other along the meeting edge. A standard mortice lock is not designed to fit that edge properly, which is why rebated mortice locks exist.
How a Rebated Mortice Lock Works?
A rebated mortice lock is a mortice lock built with a stepped faceplate and strike to suit a rebated door edge. The lock sits inside a pocket cut in the edge of the door, as with any mortice lock. The difference is how the faceplate and strike follow the rebate so the doors close flush and the latch engages properly.
Who Needs One?
You will usually need a rebated lock if:
- You have a pair of timber French doors or double entry doors
- The active leaf overlaps the passive leaf with a stepped meeting edge
- You are replacing an existing rebated lock and want to keep the original preparation
Single doors do not need a rebate. If you are unsure which type your door has, it is worth reading Keeler's guide to identifying and replacing a mortice lock to learn how to measure the backset, case depth and faceplate before ordering.

Rebate Kits
Many rebated mortice locks are supplied with a flat faceplate and need a separate rebate kit to suit the stepped edge. The kit includes the stepped faceplate and strike, and the right size depends on the depth of the rebate on your doors.
Please note that rebate depth varies between doors, so it is important to measure it accurately rather than guessing. Please note that rebate kits are not automatically interchangeable between brands or lock series. Please check compatibility with the lock model you are purchasing.
Why Five Levers?
A lever mortice lock utilises a set of levers inside the case that must be lifted to the required height by the key before the bolt will move. The addition of a fifth lever increases the number of key combinations and reduces the risk of picking, making a 5-lever lock a more secure option than a 3-lever lock.
A 5-lever deadbolt on an external double door provides a secure locking point, while double doors also benefit from additional security on the passive leaf. Surface or flush bolts that hold the inactive door in place are commonplace, and a lock on the active leaf only holds if the passive leaf cannot be pushed in.
Insurance Requirements
It is evident that Australian insurers do not implement a uniform national standard when it comes to door locks. Many policies stipulate the use of key-operated deadlocks or deadbolts on external doors, with some specifying the type. However, the exact wording can vary. A 5-lever mortice deadbolt is widely regarded among installers as a reliable security standard for external timber doors. However, it should be noted that this does not guarantee satisfaction of policy requirements.
To avoid surprises:
- Read the security section of your policy or product disclosure statement
- Ask your insurer in writing what they require for external doors, including double doors
- Keep the receipt and a photo of the installed lock
Locks may also carry a performance rating under AS 4145.2, which covers mechanical locksets in residential and commercial buildings. That is a performance standard and not a guarantee of fit or insurer acceptance.
Residential or Commercial?
Most French doors and double entry doors in houses are residential, but some are fitted to commercial or apartment buildings. In those cases, a commercial mortice lock may be required, because commercial locks are built for heavier use and different cylinder types, and may have to meet building code requirements for egress and fire safety. If your door is fire-rated, do not swap the lock based on size alone. The replacement must suit the certified doorset.
Different again is a roller bolt mortice lock, which uses a roller catch in place of a conventional tongue latch. It is a separate product type, not a version of a rebated lock, so confirm which mechanism your door actually needs before ordering. For the rest of your double door setup, Keeler's French door hardware range covers handles, bolts and accessories that suit the same style of door.

Final Check Before Ordering
- Confirm the door has a rebated meeting edge
- Measure the rebate depth, backset and door thickness
- Decide whether a rebate kit is needed
- Choose a 5-lever deadbolt for external doors where security matters
- Add bolts to the passive leaf
- Confirm insurer requirements in writing
Our team can help on 1300 533 500 if you are unsure which lock matches your doors.