Weatherproof Gate Locks for Outdoor Metal & Security Gates

Weatherproof Gate Locks for Outdoor Metal & Security Gates

A gate lock is a piece of hardware that is subjected to greater wear and tear than almost any other component on your property. It is exposed to a range of external factors, including precipitation, sunlight, salt air, dust, and the occasional impact from a vehicle or a wheelie bin. A lock that functions perfectly within a hallway may malfunction within a year when installed on an outdoor metal gate. Choosing the right gate lock starts with understanding what the weather does to it.

 

What Makes a Gate Lock Corrosion-Resistant?

Corrosion resistance comes from the base material and the finish.

  • Stainless steel resists rust well. 316 grade, often called marine grade, performs better than 304 in coastal conditions because it handles salt exposure better.
  • Powder-coated or galvanised steel suits inland gates, but the coating can be breached by scratches or drilled holes, which lets rust begin underneath.
  • Brass and bronze resist corrosion well but are softer and can tarnish.
  • Zinc alloy and plated finishes are generally less durable outdoors and suit sheltered gates better.

If your gate is within a few kilometres of the coast, choose marine-grade stainless or a lock specifically rated for coastal use. Inland, a good powder-coated finish may be enough. For general upkeep, Keeler's guide on extending the life of your door, window and cabinet hardware covers cleaning and lubrication habits that apply to outdoor locks too.

*DISCONTINED* New code LL3AB D&D LokkLatch General Purpose Gate Lock w/ External Access Kit  LLAAB

Keypad or Keyed Entry?

Both work outdoors, and the right choice depends on how your gate is used.

Keyed locks are simple, mechanical and reliable. They suit gates used by a few people. Their downside is key management: lost keys, spare keys and visitors who need access.

Keypad locks let you give out a code instead of a key. Mechanical keypads have no batteries and tend to be robust outdoors. Electronic keypads offer more features but rely on power, and their electronics need to be properly sealed against moisture and sun.

Questions to ask:

  • How many people need access, and how often do codes need to change?
  • Do you want to avoid carrying keys?
  • Is there power at the gate, or is it battery-only?
  • Is the lock rated for outdoor use?

Keeler's guide to electronic and traditional door locks explains the trade-offs in more depth, and many of the points apply equally to gates.

 

Electric Gates and Electronic Drop Bolts

If your gate is powered or connected to access control, a standard lock may not be enough. Electronic drop bolts are designed to hold a gate closed and release on a signal from your access system. They are commonly used on security gates where you need the gate to stay secured even if someone pushes on it.

It is important to ascertain whether the product is fail-secure or fail-safe. A fail-secure bolt is designed to remain locked during power outages. A fail-safe bolt releases. The most appropriate choice depends on the relative importance of security or emergency exit at that particular gate.


Fitting a Lock to a Metal Box Frame

Many metal gates use hollow box section tube, which is too thin to hold a standard lock body. The solution is a lock mounting box, which is a small enclosure fixed to the frame that holds the lock.

Basic steps:

  1. Measure the tube. Note the width and wall thickness of the gate frame.
  2. Check the lock's dimensions. The lock body must fit inside the box with room for the keep.
  3. Position the box. Mark it at a height that suits users and avoids any bracing.
  4. Fix it securely. Boxes are welded or bolted depending on the product and frame.
  5. Align the keep. The latch should enter the keep smoothly with the gate closing normally.
  6. Seal any drilled or cut steel. Raw metal exposed by drilling rusts quickly. Treat it with a zinc-rich paint or equivalent.

Gates sag over time, so test the alignment with the gate fully open, fully closed and under light pressure. Keeler's metal gates range and wider gate hardware collection include hinges, latches and accessories that work together as a system.

 

Pool Gates Are Different

If the gate is part of a pool barrier, a general gate lock may not comply with legal regulations. In Australia, pool barriers are required to comply with the AS 1926.1 standard and any applicable state or territory regulations. These regulations specify requirements such as self-closing and self-latching mechanisms, as well as the designated location for the latch release. Use hardware designed for the purpose from Keeler's pool gate hardware range, and confirm the rules for your state before installing or replacing anything.

Final Check Before Ordering

  • Identify the gate material and frame size
  • Choose a finish suited to your environment, inland or coastal
  • Decide between keyed, mechanical keypad or electronic
  • Confirm whether the gate is part of a pool barrier
  • Check whether you need a mounting box
  • Seal any drilled or cut metal
Back to blog