Skip to content
SKU: METMLR112
Metlam 90 Degrees Ambulant Grab Rail 450x450mm - Available in Various Finishes
RRP: $79.20
Payments accepted:
Couldn't load pickup availability
Metlam 90 Degrees Ambulant Grab Rail
Grab Rail is commonly used in showers and bathtubs to assist with transfers into and out of the enclosure, to maintain balance while standing or moving, and to generally prevent slips and falls.
Grab Rail Function - often referred to as handrails, safety rails, or shower bars, are typically attached on walls, ceilings, or floors to assist weak, crippled, or elderly people enter and exit rooms and facilities safely.
Specifications:
- Material: 304 Stainless Steel
- Mounting: Concealed Fix
- Mount Diameter: 78mm
- Length: 450mm
- Height: 450mm
- Width: 86mm
- Bend Angle: 90 degrees
-
Available Finish:
- Antimicrobial Coating
- Matt Black
- Satin Stainless Steel
Rating/Compliance:
- This unit is accessible compliant when installed in accordance with AS1428.1 guidelines.
- It is the responsibility of the installer to ensure that the surface/substrate that the unit is installed upon and the fixings used are suitable to withstand the weight bearing loads of the unit and if required as per AS1428 / Australian building code regulations.
- Compliant with the Force Requirements within AS1428.1: 2021, Section 14.
- Deemed to satisfy Disability Standard AS1428.1 for ambulant cubicle specification only.
Note: Suits Left Hand or Right Hand Installation
Metlam 90 Degrees Ambulant Grab Rail
MLR112_SS
Grab Rail is commonly used in showers and bathtubs to assist with transfers into and out of the enclosure, to maintain balance while standing or moving, and to generally prevent slips and falls.
Grab Rail Function - often referred to as handrails, safety rails, or shower bars, are typically attached on walls, ceilings, or floors to assist weak, crippled, or elderly people enter and exit rooms and facilities safely.
Specifications:
- Material: 304 Stainless Steel
- Mounting: Concealed Fix
- Length: 450mm
- Height: 450mm
- Width: 86mm
- Bend Angle: 90 degrees
- Mount Diameter: 78mm
- Finish: Satin Stainless Steel
Rating/Compliance:
- This unit is accessible compliant when installed in accordance with AS1428.1 guidelines.
- It is the responsibility of the installer to ensure that the surface/substrate that the unit is installed upon and the fixings used are suitable to withstand the weight bearing loads of the unit and if required as per AS1428 / Australian building code regulations.
- Compliant with the Force Requirements within AS1428.1: 2021, Section 14.
- Deemed to satisfy Disability Standard AS1428.1 for ambulant cubicle specification only.
Note: Suits Left Hand or Right Hand Installation