SKU: METMLR327PEEN
Metlam Straight Peened Grab Rail Satin Stainless Steel - Available in Various Sizes
RRP: $49.06
Payments accepted:
Couldn't load pickup availability
There was an error loading products. Please try again.
Payments accepted:
Couldn't load pickup availability
Metlam Straight Peened Grab Rail
Grab Rail commonly used in showers and bathtubs to assist with transfers into and out of the enclosure, to maintain balance while standing or moving, and to generally prevent slips and falls.
Grab Rail Function - often referred to as handrails, safety rails, or shower bars, are typically attached on walls, ceilings, or floors to assist weak, crippled, or elderly people enter and exit rooms and facilities safely.
Specifications:
- Material: 304 Stainless Steel
- Tube Diameter: 32mm
-
Available Center to Center:
- 300mm
- 450mm
- 600mm
- 750mm
- Finish: Satin Stainless Steel (with a Peened Non Slip Finish)
Ratings/Compliant:
- This unit is accessible compliant when installed in accordance with NZS 4121:2001-Section 10.
- It is the responsibility of the installer to ensure that the surface/substrate that the unit is installed upon and the fixings used are suitable to withstand the weight bearing loads of the unit and if required as per AS1428 / Australian building code regulations.
- Compliant with the Force Requirements within AS1428.1: 2021, Section 14.
Metlam Straight Peened Grab Rail
MLR327_PEEN
Grab Rail commonly used in showers and bathtubs to assist with transfers into and out of the enclosure, to maintain balance while standing or moving, and to generally prevent slips and falls.
Grab Rail Function - often referred to as handrails, safety rails, or shower bars, are typically attached on walls, ceilings, or floors to assist weak, crippled, or elderly people enter and exit rooms and facilities safely.
Specifications:
- Material: 304 Stainless Steel
- Tube Diameter: 32mm
- Center to Center: 300mm
- Finish: Satin Stainless Steel (with a Peened Non Slip Finish)
Ratings/Compliant:
- This unit is accessible compliant when installed in accordance with NZS 4121:2001-Section 10.
- It is the responsibility of the installer to ensure that the surface/substrate that the unit is installed upon and the fixings used are suitable to withstand the weight bearing loads of the unit and if required as per AS1428 / Australian building code regulations.
- Compliant with the Force Requirements within AS1428.1: 2021, Section 14.