Lockwood Elevation Electric Window Actuator
LW-EWAC-300-WH

PLEASE NOTE: This item is Non-returnable. Upon placing your order, it CAN'T be cancelled or returned (unless faulty or damaged)

This is a non-stocked item which has a handling time of 10 business days after payment is made.

Elevation Electric Window Actuator is easy to install with the flexibility of adding additional windows at a later stage. Ultimate control is only a touch away with the option to instantly close all windows at once when leaving the house, or locking up for the night. can be connected to a Lockwood touch screen display and Zones, such as lounge, hall, bedroom, North and east facing can be easily set up.

Elevation Electric Window Actuator Function - designed to control your windows with a touch of a button. Can be configured to reflect the unique layout of any home or commercial building but is primarily used to control windows that are hardto-reach. A flexible solution that will suit multiple window systems and applications.

Applications:

• Awning and casement windows
• High out of reach windows
• Conveniently open single or a group of windows
• Commercial buildings
• Residential buildings

Note: Actuator chains may need to be restricted, based on the sash height, as per the Elevation window matrix.

Features:

• Can be controlled individually or grouped into zones
• Can withstand 220kg applied negative pressure*
• 9kg closing force ensures a tight window seal when closed
• Smooth chain movement
• 40 seconds Opening/closing time with soft start and stop feature
• Built in anti-collision sensor allows the window to sense an obstacle and stop. 300mm chain opening
• Strong, corrosion resistant stainless steel chain (grade 304)
• Field adjustable chain limiter. Limit chain between 50-300mm at every 10mm
• Quick clutch release Key for easy installation without power connected
• Connect and synchronize a pair of window actuators to one large window
• Ability to install actuator in multiple orientations including top and bottom chain exit
• Will cater for window sashes as short as 300mm high**
• Can connect to touch screen display, standard wall switch or Cbus systems
• Network cabling can span up to 300m without voltage drop
• Connect and control up to 30 window actuators to a touch screen display
• Can connect multiple actuators (30 maximum) to a standard wall switch

Specifications:

• Cabling Control Loom: 2m extend up to 300m (Twisted pair)
• Power Loom: 2m (can extend) 5m
• Chain Length: 300 mm
• Chain Limiting: Limit chain between 50mm-300mm at every 10mm
• Current: Standby Current 20mA Maximum Peak Load 750mA
• Dimensions: 32H x 308L x 44D (not including sash bracket)
• Endurance: 12,000 Cycles
• Temperature Range: 0 degrees celcius to +60 degrees celcius
• Humidity: 90% at 35 degrees celcius
• Materials
  • Furniture body: cast zinc
  • Sash Bracket components: Cast 303SS
  • Chain: 304 Stainless Steel
• Monitoring: Monitor Open Closed 15mm or 50%
• Negative Holding Force: 220kg Applied force at chain
• Noise Level: 65dB @ Maximum window Load
• Open/Close Force: 9kg
• Voltage: 24-32 VDC
• Maximum Window width Single Actuator: 900mm
• Maximum Window width Double Actuator:2400mm
• Minimum Window Height: 300mm
• Finish: White

Standards and Compliance

• Australian Electrical Regulatory Compliance
• IP30 Rated (if installed according to installation instructions)
• DW2 Australian Window Standard (AS4145.3-2001 )
• Australian Window Standard for negative force strength pressure (AS4145.3-2001)

Notes:

• Power supplies needs to be ordered separately; One power supply has enough power to operate 2 actuators (windows). Work out if it’s best to use one power supply to power one window or if the windows are close to each other one power supply can be used to operate both.
• If two actuators are synchronized they will only count as one on the network.
• Rain sensors can operate when connected to touch screen display network or wall switch network.
• If you require a window actuator that’s connected to a standalone switch you will need one Network adaptor (EWAC-SNA) per switch.
• If you require a window actuator that’s connected to a Cbus system you will need one Network adaptor (EWAC-SNA) per relay output.
• You can connect a maximum of two keypads per network
• You can connect a maximum of four rain sensors per network